To add more heaters to your system, you will need an additional heater controller (Y-cable). Below is a guide on how to pair the second heater with your existing remote:
1. Connect the Y-Cable
- Attach the heater controller (Y-cable) to the second heater.
2. Select the channel on the remote you would like the heater to be active on. Then press and hold the up arrow until the channel light stays solid at the top of the remote.
3. Once the channel light is on, turn the heater on. The heater controller will then vibrate to indicate pairing is successful.
The heater is now paired to your main remote control, allowing you to easily operate the heater using the up/down arrows.