So you’re ready to give your pergola that flawless, finished look? The beam cover is the ultimate hack to hide your control box and keep everything looking neat ✨
Here’s how you do it:
- Installation: To properly secure the cover, first slide it into the gutter. Once it is in place, click it in at the top, and then push the bottom part in until it clicks into place. You can find a demonstration of this in our installation video on YouTube.
Note: If you find that you cannot close the beam cover, it is likely because the control box was installed too low. You will need to move the box higher up on the beam to clear the path so the cover can snap shut properly.
- Removal: If you need to take it off, don’t stress! Use an L-screwdriver to gently unhook it from the side. We have a separate guide for this process on our YouTube channel.